The home page Recent updates Site map Lamborghini links Alphabetical index The Lamborghini Cars forum Search for keywords Contact us!
The Lamborghini Espada 400 GTE.
Jarama Specifications chart
General information Chassis information Overall dimensions Drivetrain and gearbox ratio's Engine information Performance figures
General Information - Dimensions - Chassis - Engine - Drivetrain - Performance


The Lamborghini Espade 400 GTE, full specification list.



General Information

Type :Lamborghini Espada 400 GTE (Series II)
Years built :November 1969 - November 1972
Production :575
Chassisnr. :Series I + II + III : nr. 7001 - 9900
Presentation :Early 1970 Brussels Auto Show
Type of car :Two-door coupe, four seater
Designed by :Marcello Gandini for Bertone
Built by :Bertone



Dimensions

Wheelbase :2650 mm (104.3 in)
Overall length :4730 mm (186.2 in)
Overall width :1860 mm (73.2 in)
Overall height :1185 mm (46.7 in)
Front track :1490 mm (58.7 in)
Rear track :1490 mm (58.7 in)
Ground clear. :127 mm (5 in)
Front overhang :932 mm (36.7 in)
Rear overhang :1148 mm (45.2 in)
Weight :1635 kg (3604 Lbs)
Distribution :52/48 % front / rear



Chassis information

Structure :Semi-monocoque of sheet steel
Body :All-steel body of integral construction, aluminium was used for the hood
Suspension :All-independent parallelogram arms, coil springs, telescopic Koni dampers and anti-roll bars
The LancoMatic suspension was still available as an option only, few Espada's were ordered with it.
Brakes :Girling ventilated disc brakes on all wheels operated by two vacuum servo units with independent circuits to front and rear
Front :300 mm
Rear :280 mm
Steering type :ZF Worm & roller, 4.3 turns from lock to lock
Turning circle :9.74 m
Front tyre size :HS 205VR15
Rear tyre size :HS 205VR15
Type :Pirelli Cinturato
Front rim size :7x15 inch
Rear rim size :7x15 inch
Type :Campagnolo cast magnesium (five bolt wheel hubs)



Engine information

Type :V-12 60 degree, aluminium block with pressed-in liners, front mounted, rear wheel drive
Distribution :Dual overhead camshafts, chain drive, two valves/cyl.
Main bearings :7
Cyl. Capacity :3939 cc
Bore & stroke :82 x 62 mm
Compr. ratio :10.7:1
Max. power :350 bhp at 7500 rpm
Max. torque :394 Nm (290 lbs.ft.) at 5500 rpm
Cooling system:Pressurized, vertical flow radiator and twin electric fans
Ignition :Alternator with Magnetti Marelli coils and distributors
Plugs :Bosch 235 P21
Electr. system :12 V
Alternator :550 W Bosch
Fuel system :Electric Bendix fuel pump, 6 twin-barrel Weber 40 DCOE 20 carburetors
Fuel type :100 Octane
Fuel cons. :22.9 Lt./100 Km
Lubrication :Wet sump



drivetrain information

Type :Lamborghini five-speed + reverse manual all-synchromesh driving a Lamborghini differential
Clutch :Dry-single plate, hydraulically operated
Disc diameter :241 mm
1st gear ratio :2.520:1
2nd gear ratio : 1.735:1
3rd gear ratio :1.225:1
4th gear ratio :1.000:1
5th gear ratio : 0.815:1
Rev. gear ratio :2.765:1
Final drive ratio :4.09:1 (4.50:1 became optionally available)



Performance figures

Top speed :260 Km/h (161 Mph)
0 - 100 Km/h :6.6 sec
Standing Km. :26 sec
Capacities :
Fuel :93 Lt in two tanks
Engine oil :14 Lt.
Cooling system :14 Lt.
Luggage :280 Lt.
Price :US $ 19.500 (MSRP in 1971) or Lire 8.750.000
Current value :$ 13,650 - $ 30,300 (based on sales in 2003)



Return to list
Return to the Early V-12's.



If you would like to contact me with any comments or suggestions, mail me


The Lamborghini Cars MailBox

info@lambocars.com

Neither this site nor my E-mail is associated with the Automobili Lamborghini Holding SpA
Lamborghini Cars is a non-commercial enthusiast website, we do not sell cars or parts, the Lamborghini name,
all model names and the Raging Bull logo are registered trademarks of Automobili Lamborghini SpA.