Some people really don’t like what Mansory does to the current Lamborghini models, and while I liked their Venatus shown at the 2019 Geneva Motor Show, a one-off based on the Urus, I sometimes wonder who orders some of the specs I’ve seen on their Venatus Widebody production kit … like this yellow one that was listed for sale a while ago, that was a serious overload of yellow.

But I came across a different kind of kit Mansory offers on the Lamborghini Urus Super SUV, they call it the ‘Soft Kit’, and it actually looks rather nice from the official photos they published. It’s not completely crazy but comes as a selection of clear carbon fiber add-ons to be fitted to the Urus without wide fenders or massive air intakes and vents.

It seems the most special parts of the Mansory Soft Kit are the front splitter add-on and the rear diffuser replacement, both in clear carbon fiber with a glossy finish, do keep in mind that the rear bumper/diffuser replacement from Mansory is available for the Urus with or without the Urban Road Assistant, and with or without the towbar.

If you fit the Mansory rear bumper replacement you can either keep the factory original exhaust tailpipes or fit a set of stunning, angular styled, aluminum tips. While you can add side skirts in carbon fiber too, replace the wheel arch extensions, door inlay, front bumper insets … all made from carbon fiber with a glossy finish.

To really complete the look of the Mansory Urus Soft kit you can add a more aggressively styled air vent on the front fenders, with Mansory script naturally, instead of the original Tricolore flag. A carbon fiber cover for the rear air vents is also available from Mansory … among several additional options for the Soft Kit.

It all depends on just how far you want to take the look of your Lamborghini Urus, and how much money you would like to spend on it … like the Venatus front hood with the large air vents, it can be fitted separately too it seems, Mansory even offers the vented front fenders in a ‘narrow-body’ style for the Soft Kit.

Carbon fiber covers for the exterior mirrors are listed too, as are a set of vent inserts to fit underneath the taillights, or a Mansory script between those taillights, or how about a set of ‘canards’ for the side of the front bumper.

We wouldn’t be talking about Mansory if you couldn’t add some rear wings to your Lamborghini Urus, and in this case, a set of three wings is possible, a small ‘ducktail’ wing on the rear hatch, a larger Performance wing that fits over the previous ducktail, and a third one at the edge of the roof … just for good measure.

If you want more than just looks, fear not, Mansory has you covered … a sport exhaust, downpipes without cat, also available with a 200-cell cat (for export only), that will cover the sound … still not good enough?

No problem, add the Mansory Performance box, which is a plug-and-play ECU controller that adds 50 PS and raises the top speed by 20 km/h. But an even better option is the P745 kit, raising power to 745 PS … or the top-of-the-line P820 kit, which boosts power to 820 PS for the Lamborghini Urus.

Mansory offers multiple wheel designs for the Lamborghini Urus, the Y.5 light-alloy one in 22-inch, with 285/40 22 and 325/35 22 tires, or the YN.5 forged wheel that comes in 24-inch that goes to 295/30 24 and 355/25 24 rubber … the Veneno Raze inspired Mansory CV.7 is also possible for the Urus in 24-inch.

For the interior, you can turn to Mansory to completely modify it to your taste, or just get a custom steering wheel and some carbon fiber trim to be added, Mansory race pedals are possible too, as are velour floor mats for the front and rear passengers, they even list a matching mat for the luggage compartment.

All these carbon fiber parts from Mansory come with a glossy finish as standard, but if you prefer a satin finish they can offer that as an option too …

The post Mansory Soft Kit For Urus appeared first on LamboCars.

At the time of writing, we’ve just seen the announcement a total of 10,000 Aventador have been built, about a year ago a total of 14,022 Huracan left the factory gates, and in early August 2020 the 10,000th Urus was completed still Marius Dumitrascu, from the new Marius Designhaus opted for the Lamborghini Super SUV, the Urus, as their first project car, aptly called the MD1 the Marius Designhaus nr 1.

And Marius Designhaus isn’t doing half work, they came up with a complete aero kit for the Lamborghini Urus, made locally in Europe, from ultra-light, high-end carbon fiber, some parts even feature a Nomex honeycomb core and AISI 316 stainless steel for added durability, the screws used to fit the aero kit are made from grade 5 titanium, that’s aeronautical quality.

As a first in the automotive tuning scene according to Marius Designhaus, they use a mix of carbon fiber and zylon on the bumpers for shock absorption, zylon is an evolution of kevlar used in racing, but now also available on the open road on the Urus MD1, another nice touch is the fact you can install the MD1 kit one piece at a time, only the front bumper, only one of the two rear wings it all fits together with the factory original parts.

The MD1 front bumper completely replaces the original part, massive air vents and a deep front spoiler are only a few characteristics of this aggressively styled front, add the new engine cover, once again with vents, and you completely change the front look of the Lamborghini Urus.

The fun continues on the side, with custom covers for the side mirrors, replacements for the front fenders, naturally with new side vents and redesigned wheel arch extensions both to the front and the rear combined with a pair of stunning side sills, with aerodynamic uprights in front of the rear wheels, similar to the ones found on the lower lip of the front bumper.

And the aggressive styling continues at the rear, a completely new lower diffuser with vertical fins that run right up to the rear hatch, air vent covers behind the rear wheels, and both an upper and a lower rear wing, one at the edge of the roofline, and one at the bottom of the rear window, if you look closely at the roof you’ll notice two fins running from front to back that’s not the luggage carrying system, but aero parts from Marius Designhaus.

On these photos it looks like Marius will develop center-lock wheels for their Lamborghini Urus MD1 kit, or at least center-lock look-alikes, whichever they go for, these wheels look great and suit the aggressive look of the MD1 perfectly.

Pricing hasn’t been published on their website, but there is a pre-order button you can press, also note the MD1 production is limited to 30 units only, feel free to visit www.MariusDesignhaus.com to get in touch with them.

The post Lamborghini Urus MD1 by Marius Designhaus – Guide appeared first on LamboCars.

Peter Northrop, CEO of 1016 Industries emphasizes the fact that the entire carbon body kit is bolt-on using the original OEM mounting points, with the quality and attention to detail that an owner could expect from the factory, and even the looks could be confused as being factory original.

Both the front and rear fender are widened considerably by 1016 Industries, 3.9 inches (10cm) at the rear and 3.4 inches (8.65cm) at the front, and you’ll just need to add the new side sills and door panels to the kit, complete with the front spoiler and rear diffuser. At the rear, you’ll have not one, but two wings fitted and to really make your Urus look different the special Racing Hood from 1016 Industries is the icing on the cake.

The entire widebody kit from 1016 Industries for the Lamborghini Urus is available in standard material at $30,795 but you really should opt for the Forged Kit that sells at $34,795 the latter one just looks so amazing on this Super SUV.

On the inside you can also have 1016 Industries replace those grey parts on the dashboard, central console, and door panels, with either Carbon Fiber or Forged panels, the standard parts are listed at $7,000 while the Forged parts are only $600 more expensive, but they look so good in the images.

And just in case you don’t really think the 640 hp factory output suits your needs, 1016 Industries offers some power upgrades that don’t void your factory warranty Stage 1 at $3,495 will bring you 780 hp to play with Stage 2 will set you back $4,395 but you will be rewarded with no less than 840 hp, complete with an app to start the engine remotely, log engine data and record your acceleration data or the data from the valet.

Do keep in mind the prices above don’t include any of the stunning looking wheel and tires sets shown on these official photos, you might want to add several thousands more to make your Urus really stand out like this.

I did find some information online you are able to buy one of a limited production run of 50 units of the 1016 Industries Lamborghini Urus with the widebody kit and the Stage 2 engine upgrade for $350,000 and that includes the donor vehicle. And what’s even better you can buy this entire kit right at your local Lamborghini dealer in the United States I’m not sure if this is possible outside of the US.

The post Widebody Lamborghini Urus by 1016 Industries – Guide appeared first on LamboCars.

If you want to add the Keyvany Keyrus to your garage, complete with 24-inch wheels, engine tuning and the entire carbon fiber aero kit we’re looking at €480,000 … that does include the factory Lamborghini Urus mind you.

Keyvany GmbH is located in Frankfurt, Germany, and was founded in 2018, but the people working here have 20 years of experience with carbon fiber and at this time have three cars on their website (www.keyvany.com), a Bentley Continental GT, a Mercedes G-Class … and this wild-looking Lamborghini Urus that has been designed in-house.

The Keyrus aero kit adds 29mm to the already wide Lamborghini Urus by installing new, carbon fiber fenders to the front and rear, a massive side sill with integrated air intakes to cool the brakes and a front and rear bumper that completely replace the factory original units … both bumpers from Keyvany are entirely made from carbon fiber and are fixed to the original factory fixtures … a very nice feature.

The rear diffuser holds a pair of carbon fiber exhaust tips, Keyvany even considered a pair of straight pipes for the Urus, which would add another 60 hp, but they deemed these a bit too loud … but it never hurts to ask them about it if you bring in your Urus to be converted.

At the rear, you’ll also find not one, but two rear wings, one at the top of the rear hatch, and another one at the bottom of the rear window, this latter one adds 13cm to the rear … naturally, all made from carbon fiber, just like the rearview mirror housings and that impressive, vented engine cover … which is 6 kg lighter compared to the factory original unit.

If you can leave the Lamborghini Urus at Keyvany for 4 to 6 weeks they can also transform the interior completely, they have an in-house shop to handle the leather and carbon fiber on the inside, while Lamborghini doesn’t offer a carbon fiber interior package yet, Keyvany does, putting carbon fiber air vents on the dashboard, carbon fiber surrounds on the central console … and even a carbon fiber shell on the back of the front seats.

Full leather floor mats for both the interior and the luggage area is also a possibility … and just look at the double Q-Citura style stitching … amazing and completely custom, all done at Keyvany, and if you really want something special … how about a starlight headliner?

The post Keyvany Keyrus Lamborghini Urus – Guide appeared first on LamboCars.

Because that is exactly what Prior-Design did with this ‘Roberto Geissini’ edition of their Lamborghini Urus … add a carbon fiber widebody kit to the beast from Sant’Agata, being lightweight, they could increase the width of the Urus considerably with four wheel arch extensions, coupled together with a new pair of side skirts.

Naturally, company founder and owner Andreas Belzek supervised the design of this massive SSUV, with a new front spoiler, a modified front fascia, different rear diffuser … and not one, but two rear wings, one of the hatch itself and one at the edge of the roof.

But probably one of the most impressive items in this Prior-Design kit has to be the engine cover … they added a massive ‘power bulge’ on top of this carbon fiber hood complete with air vents … very, very intimidating indeed, but somehow it all ties in together very nicely and at first glance you might not even notice the amount of difference between this car and a factory original … but the modifications are massive indeed.

A real giveaway are the almost oversized wheels, measuring 24 inches in diameter, these come with 285/30R24 up front and massive 335/30R24 at the rear, the Urus is brought down a little further to the road courtesy of a set of H&R springs.

The original render from Prior-Design showed their Urus finished in a metallic red shade, with partly painted wheel arches, but for his car, Robert Geiss went with a satin black and fully exposed, clear carbon fiber wheel arch extensions coupled with some bright green touches of color … very nicely done.

It seems Roberto Geissini will be bringing more cars in this style in their business venture with Prior-Design in the future.

The post Lamborghini Urus by Prior-Design – Guide appeared first on LamboCars.

The overall roofline and engine cover seems to be standard, but just take a second look at those wheel arch extensions … very angular and extremely wide, this Urus created virtually by Basil Masri looks like it ran into the Veneno at the factory, with that very low front splitter adding vertical fins and that traditional red line to the otherwise black or clear carbon fiber part.

Still up front we get to see two turbochargers being visible through the front bumper while the intercooler is fitted on the outside, even the front fenders have massive air intakes that offer a view of the wide Nitto tires.

On the side we notice a pair of very deep, black side sills with again the red line, that connect the front fender to the even wider rear fenders, once again complete with air intakes and vents covering a pair of extremely deep dish wheels and ultra-wide Nitto tires.

Naturally, a rear wing couldn’t be forgotten on this Mad Max like Lamborghini Urus, so Basil took the Veneno unit and fitted it to the rear hatch of the Urus, complete with vertical center fin holding the third brake light, the exhausts remind me of those seen on the Urus Concept by the way.

So what would a Lamborghini Urus like this be used for you might ask … racing, drifting, hill climbing … you name it, this is a virtual render, so your guess is as good as mine, but it does look totally over the top indeed.

The post BASIL MASRI CREATED AN ULTRA-WIDE URUS appeared first on LamboCars.

German-based Novitec tuner is already famous for their aero and tuning packages for the Lamborghini Huracan and Aventador, but now they also offer some very interesting items for what might become the most popular Raging Bull ever … the Urus, which Lamborghini themselves already call the Super SUV, Novitec makes it even more ‘Super’ with both aero and engine tuning.

You can start with the simple plug-and-play N-TRONIC modules, one for each cylinder bank, that change the engine electronics by remapping the injection, boost pressure control and ignition … add the new high-performance exhaust system, and go for the level three performance upgrade to reach 782hp, resulting in acceleration figures of 3.3 seconds to reach 100 Km/h from a standstill and a top speed of 310 Km/h.

Now we all know looks matter, so Novitec Torado created the Esteso widebody aero kit for the Lamborghini Urus, a 14-part collection of PUR-Rim in OEM quality that makes fitting them as easy as possible with a perfect paint finish to combine with the original parts from the factory.

The large Esteso fenders add 10 cm to front of the Urus and an impressive 12 cm at the rear, making the Super SUV measure 213 cm wide in total, making it 10cm wider than the Aventador at 203 cm (without the mirrors), new Novitec side sills connect the front and rear wheel arches and make the Urus look even lower … the panels on the production front fenders and side mirrors can be replaced by clear carbon fiber parts from Novitec.

A new Esteso front spoiler is fitted to match the wider wheel arches while most of the standard, black production parts are again replaced by clear carbon fiber Novitec items, probably the most impressive part of this kit is the new engine cover that shows a vented look, either available in clear composite look or in a partly paintable and partly carbon fiber section … Novitec can do a more standard carbon fiber finish or the new Forged Composite version.

The rear bumper of the Lamborghini Urus gets a few flares at either side to merge with the 12 cm wider wheel arches while the lower diffuser is replaced by a Novitec item too, four rectangular exhaust tips complete the look, available in polished stainless finish or matte black … and what’s even better, these tips can be fitted to the factory original exhaust or the high-performance one offered by Novitec.

To complete the Esteso aero kit you have not one, but two wings for the rear, one to be fitted as an extension of the roof on the Urus while the second one is fitted to the hatch underneath the rear windows … both wings are finished in clear carbon fiber and can also be fitted on a factory Urus without the wider wheel arches.

Novitec reached out to Vossen to create a bespoke wheel for their Urus Esteso, the NL4 forged alloy wheels measure 10.5×23 up front and 12×23 at the rear, to be fitted with Pirelli P-Zero tires in 285/35R23 and 325/30R23 respectively, in a six-spoke design with a center cap that mimics a center-lock screw … these wheels are available in 72 different colors, smooth, brushed or polished, and can also be fitted without the wider fenders.

With a widebody kit, stunning wheels and a power increase you just need a lowered suspension too, and Novitec offers a control module to lower the original adaptive air suspension by 25mm, making this Super SUV ride lower to the ground, even with massive 23-inch wheels mounted.

The post Lamborghini Urus Esteso by Novitec – Guide appeared first on LamboCars.

We already saw the renders they made months ago, but we all know the path from render to reality can take long, it seems TopCar Design was standing by for their first actual Urus to be delivered to install their kit onto.

The kit proposed by TopCar Design is already very elaborate, including a €3,600 front bumper, a €1,450 pair of front intake splitters, 4 wheel arch extensions at €3,270, €1,550 for a pair of extensions to the vents behind the front wheels on the fenders, a carbon fiber set of 4 ‘blades’ to be installed on the doors at €1,400 and a pair of side sill extensions in the same material for €4,000.

At the rear, you can replace the diffuser for €4,550 and add visible carbon fiber to the rear vents at €1,450 … naturally TopCar Design offers a rear wing for the Lamborghini Urus … that should be two wings in fact, one to be fitted on the border of the roof (€3,300) and one at the bottom of the rear window (€1,350) … just in case you love those TopCar Design logos you can fit 4 of them for €200.

If you take a closer look at the preliminary renders TopCar Design released earlier you will notice one thing is missing from the above list … those stunning looking, red exhaust tips … these aren’t available yet at the time of writing, but I’m almost certain these tips will be online soon.

The one item that just has to be my favorite on the price list from TopCar Design for the Lamborghini Urus is their new engine cover … TopCar Design offers a ‘vented’ engine cover either in visible carbon fiber (€9,160) or ready to be painted (€7,760) and it looks absolutely amazing with a new, more aggressive design including two large air vents.

So with the clear carbon fiber engine cover, you are looking at a total price of just over €35,000 … without fitment, and if you don’t go for the ‘paint ready’ option hood you don’t have any paint costs … that might sound like a lot of money, but you do get all parts in clear carbon fiber, and that’s an expensive, lightweight material anyway.

For more information, and possibly put in an order, get in touch with TopCar Design in Russia at topcar-design.com

The post Lamborghini Urus by TopCar Design – Guide appeared first on LamboCars.

Just to put this into perspective, the factory standard Lamborghini Urus comes with a twin-turbo V8 engine, delivering 650 hp (478 kW) with a maximum torque of 850 Nm, which isn’t too bad for a big and heavy car like the Urus, but after a stay at the ABT Sportsline shop these numbers increase to 710 hp (522 kW) and 910 Nm respectively … this shaves 0.2 seconds from the acceleration figures from 0 to 100 Km/h … the Urus by ABT achieves this in only 3.4 seconds.

Hans-Jürgen Abt, CEO of ABT Sportsline, confirms the Lamborghini to be the sportiest marque in the Audi and VW Group, ABT has been tuning those marques for many years now, but only recently did they add the ABT Engine Control unit that increases the power output on this Super SUV to a massive 710 hp … with full warranty mind you.

The post Lamborghini Urus by ABT – Guide appeared first on LamboCars.

The show car had ‘1/1’ badging but on their website, Mansory does offer just about every part shown as a separate item … but the ‘Wide Body kit’ is one complete set that includes a completely new front bumper with new LED daytime running lights, a set of wheel arch extensions, a pair of side sills and a new rear bumper … which comes in two versions, one that keeps the original dual exhaust tips at either side (albeit in a new design) … but the other option is what was shown in Geneva … a stunning, triple exhaust mounted in the center which looks absolutely amazing.

And that’s just the base kit … now come the options. How about a new front hood, complete with four air vents, also available in clear carbon fiber naturally, or a pair of front fenders … again with aggressive looking vents and Mansory emblem, partly in carbon fiber to match the mirror covers from the option list.

Mansory has gone really beyond their aero package this time … a total of three rear wings are listed, a roof wing, a rear decklid wing, and a massive ‘Performance’ wing to be fitted on the hatch … sadly this one wasn’t present on the Geneva Show Car, but from the option list image, it looks big and mean. Just in case you don’t like the Lamborghini script between the taillights on the Urus you can replace that section with a carbon fiber piece … with or without Mansory script.

A carbon fiber engine cover can be hiding underneath that new front hood, while a Mansory sports exhaust will make the Bull roar even louder … keep in mind Mansory is also developing their own engine tuning for the Urus, I can’t wait to see how much HP they come up with.

The show car came complete with 24-inch YN.5 (or Yavin) wheels, an ultra-light, forged wheel that comes in 10×24 inch and 12.5×24 inch to the front and rear respectively, fitted with massive tires in 295/30R24 and 355/25R24 size.

And that’s only on the outside, we know Mansory has some amazing artisans among their workforce that can create a bespoke interior that will blow you away, a new steering wheel, carbon fiber shift paddles, carbon fiber trim set, door sills, race pedals, floor mats … even a luggage mat. But if you really want to stand out you’ll opt for the ‘Interior Individualized Modification’ offered by Mansory … a custom interior as seen on this show car, it is simply magnificent.

The post Mansory Venatus – Guide appeared first on LamboCars.

So far we can only see a few different angles that have been rendered, but it is already clear we’ll be getting a new engine cover from Vorsteiner, probably also made from lightweight carbon fiber, and containing a large air vent in the middle, looking very aggressive.

And that complements the new lower front bumper lip in styling, add a pair of side sills and a massive, rear lower diffuser into the equation and you end up with a very aggressively looking Lamborghini Urus.

But Vorsteiner hasn’t finished yet, not one, but two rear wings are visible on these renders, one  at the edge of the roof, and a second one on the rear hatch itself … and if you look really close, you’ll notice Vorsteiner has put small extensions on the vents below the taillights, and a pair of larger fins on the large intakes in the front bumper, underneath the headlights.

These renders still show a set of factory wheels, but I’m certain Vorsteiner will come up with a set of bespoke wheels … perhaps even with center-locks, that would be impressive.

The post VORSTEINER PREVIEWS UX-07 KIT FOR THE LAMBORGHINI URUS appeared first on LamboCars.